CHANGELOG :

Update #10 (10/02/18) : Changed T110 wheat to T45 wheat. I would prefer to use T110 (as it contains more iron and other minerals) but it's harder to find so I've been using mostly T45 for the past months anyway. I added a little bit of iron that was lacking (because of the use of T45). I only need about 1.5mg more, so I figured I'd crunch a 15 mg pill in my 10 days batches. Finally I switched from 200 wheat/150 buckwheat to 200 buckwheat/150 wheat.

Update #9 (19/09/17) : Doppelherz isn't sold in France anymore, so I replaced it with My Protein's basic Vit D3 + calcium, which is cheaper anyways.

Update #8 (23/02/17) : Added 27g/day of PPI, in order to vary my sources of protein (PPI is also supposed to be absorbed slower) and to better absorb the lysine-lacking proteins I get from the wheat. In order to keep my calorie intake at a correct level, I lowered the maltodextrin to 40g/day.

Update #7 (12/02/17) : I've been starting the cutting phase for a month now, but I decided not to change this recipe for now, since I want it to be my "baseline recipe". I still wanted to explain how I cut calories during the cutting phase : I first begin to cut the maltodextrin, which is just empty calories. The I cut the sugar off but keep a few grams a day to keep the taste ok. Finally, I'll diminish the wheat. And finally I'll diminish the canola oil, in order to get to just below 2000 kcal. My mineral and vitamin intakes should remain near 100% for the most part.

Update #6 (29/08/16) : Put the maltodextrine back to 65 (from 33) and the sugar to 20 (from 0). I'm starting the bulking period but will leave the recipe unchanged (at 2700 kcal) ; i'll get more calories from "Bulking pancakes" or other sources (since i'll need to eat 2900-3000 kcal).

Update #5 : I've been eating the pancakes for about 3 months now (5 days a week, plus rare "normal meals" during the week at the beginning) and everything's seems perfect healthwise (if that was ever a concern). Updated the recipe to drop to 2500kcal, being in cutting phase (normally there's 65g of maltodextrine and 20g sugar).

Update #4 : Bought xantham gum, I'm not adding it to the recipe because I will only use it when I drink the soylent. It makes everything mix up a whole lot better.

Update #3 : I found some MSM, so I add it to the recipe, but I'm not really sure if that's really necessary nor actually good, since sulfur isn't actually mentionned by the NNR and the EFSA, in the documents I read.

Uptdate #2 : When I got tired of just drinking the damn thing, I began trying to find a way to cook it, and after some failed attemps I found the right water/powder ratio. Currently, I make delicious pancakes by adding about 185g of the powder, 27g of the oil and between 100 and 150mL of water. Concerning the other ingredients, I prefer to take the multivitamin, calcium, fish oils, molybdene and vitamin K separately, since I'm not sure of how the cooking affects the vitamins (). But I guess you could just throw everything in the blender/mixer/whatever, apart from the 2 fish oil pills, which really add a disgusting fish taste, and maybe the calcium/D vitamin tablets (which don't seem to dissolve enough, but maybe that could be fixed by letting them sit a bit longer in hot water) (about cooking soylent and how it affects the nutrients, read https://www.reddit.com/r/soylent/comments/31vu1x/soylent_how_nutrients_change_when_you_heat_it_and/)

Update #1 : After having some difficulties getting used to the taste of my recipe (especially the buckwheat), I finally found a way to actually want to drink more than enough of it, by adding sucralose (About 1.3g/day in the form of 15 "tablets" you usually put in coffee. It costs about 3€ for 300, so about 0.15€ a day that I don't include in the recipe, since I sometimes put something else to sweeten it). Also, I tend to put between 0.7-1L of water and I like the texture of it, but I will experiment putting xantham gum in it.

ABOUT THE RECIPE

When I discovered the Soylent project, I quickly began very interested in it, but I found the official version to be too expensive, since I need approximately 2700kcal a day (I weigh nearly 90kg and exercise a lot) and I was excited by the idea of doing my own soylent. After at least 15 hours of research and attempts to find the right recipe, I finally created this recipe, which should cover my needs, based on the Nordic Nutrition Recommendations (NNR 2012, you can find it here https://www.norden.org/en/theme/nordic-nutrition-recommendation/nordic-nutrition-recommendations-2012), and other official recommendation like the EFSA for the ULs (http://www.efsa.europa.eu/sites/default/files/efsa_rep/blobserver_assets/ndatolerableuil.pdf).

I was really concerned about having too high iron, copper and manganese intakes, but I found a way to bring the first two to a good level (Most of the multivitamin/multimineral tablets contain too much iron and copper, so I had to find one that didn't. The problem is that this particular multivitamin lacks some other vitamins, that's why I have to add a few vitamins by other ways), and found out that there seems to be no evidence of toxicity due to manganese from food (see the EFSA document). Also, my folate intake is quite close to the UL, but since the major problem with high folate intakes is the masking of the symptoms of B12 deficiencies, I concluded it was ok, since this recipe contains enough B12. I'm not particularly happy with the vitamin A and E intakes, which I would prefer to be at 100%, to eliminate any risk of accumulation of these fat-soluble vitamins, but since I'm far from the UL, I should be safe. As for the chloride, as many of you know the UL is based on the UL for sodium, because usually salt is nearly the only source of chloride. But chloride has not been described as dangerous by itself, and In my case, most of it actually comes from the potassium chloride, so there is no evidence I should worry.